Industrial dust collectors are crucial air treatment systems that allow for the safeguarding of employees and the work environment while also ensuring adherence to regulatory standards. Processing plant operators rely on these types of industrial dust collectors. A few suggestions can aid in extending the functionality of dust collectors while ensuring the operation remains as safe as possible.

• Dust collectors with deflagration protection

When using an industrial dust collector to capture combustible dust, it is necessary for the dust collector to have deflagration protection. The most simple, cost-effective way to solve the problem is the venting technique. However, it is suitable not for all environments.

• Pay attention to pressure capabilities

The information about pressure capabilities plays a crucial role in the specification and selection of vent sizing resulting in efficient deflagration protection.

• Ductwork protection

According to the National Fire Protection Association, ductwork protection and safety processes upstream of the industrial dust collector are essential. This can be achieved by utilizing ducting equipped with a flow-activated isolation valve that safeguards work areas and processes during a deflagration event in a dust collector. In the case of deflagration in the industrial dust collector, “the pressure wave will close the valve preventing the passage of flame and smoke to areas upstream from the valve.”

• Dust removal from the hoppers

Special attention must be given to a dust collector’s hopper, which is strictly prohibited for dust storage since this dust is seen as a potential source of fire or deflagration hazards in the dust collector system. The effectiveness of the industrial dust collector is reduced in this case,

• Application of pulse-cleaning controls

The cleaning system design of the industrial dust collector collaborates with the filter design. The combination of dust collectors with pulse-cleaning controls offers an easy, maintenance-friendly way to keep filters clean.

• Compliance with emission regulations

According to the U.S. Environmental Protection Agency, the level of air pollution emissions must be at or below their required thresholds. There are specific methods that enable the assessment of an industrial dust collector’s emission efficiency.

• Safe filter change-out

It is an optimal option if employees in the industry do not need to access the industrial dust collector to replace the filters. The dust collectors equipped with filters that are easily accessible and slide in and out of the housing conveniently are safer. For example, it is possible to use the ultrasafe scrubbing systems for these purposes.

If you would like to make your contribution to improving air quality in the industry, Redwood Technology offers a cutting-edge Multi-Vortex scrubber. Multi-Vortex scrubbing system could apply water contaminated with dust, sand, and even small rocks to capture particulate matter, different types of dust and some gases from the air.  If you would like to buy Multi-Vortex wet air scrubber or have some questions, please contact us at info@optromix.com